Silt Sock | Products

Silt Sock: Eco-Friendly Solutions for Sediment Control and Water Quality Preservation

Silt Sock Products

Silt Sock: Eco-Friendly Solutions for Sediment Control and Water Quality Preservation

Silt Socks for Erosion Control

Protect your project with our high-quality silt socks, crucial for effective sediment control and enhancing water quality.

Our products meet stringent industry standards, ensuring your site adheres to erosion control regulations. Explore a wide range of erosion control solutions on our home page.

Enhance your environmental management practices by incorporating our silt socks alongside established Best Management Practices (BMP)

Silt Socks Benefits

Advantages of Using Silt Socks in Erosion and Sediment Control

Our Silt Sock Products

Explore Our Selection of Silt Sock Products

Silt Soxx

Filtrexx SiltSoxx® is the quickest, easiest and most cost effective solution for sediment control.

  • Silt Soxx - SiltSoxx is the original silt sock BMP. Easily installed for a variety of construction applications, SiltSoxx compost filter sock reduces the labor cost required for installation and maintenance, while delivering optimal performance.

Need a Quotation?

Click below to speak with one of our professionals

Guide to Installing Silt Socks

Step 1: Site Assessment

Evaluate the Site: Determine the areas most prone to erosion and sediment loss, particularly around water flow paths, slopes, and disturbed soil areas. Assess the volume and speed of runoff to select the appropriate size and type of silt socks.

Step 2: Preparation

Clear and Prepare the Area: Remove debris, rocks, and vegetation that might interfere with the placement and effectiveness of the silt socks. Ensure the ground is relatively level where the socks will be placed.

Step 3: Placement

Lay Out the Silt Socks: Position the silt socks along the contour lines of slopes or around the perimeter of construction sites. For drainage areas, place them across the path of water flow to intercept sediment.Overlap Joints: Ensure that each section of silt sock overlaps the next by at least 6 inches to prevent gaps where sediment could escape.

Step 4: Secure the Silt Socks

Anchor Securely: Use stakes or staples to anchor the silt socks into the ground. Ensure they are embedded deeply enough to withstand water flows and remain firmly in place.Check Alignment: Make sure the silt socks are contoured to the land to prevent water from bypassing them.

Step 5: Fill Gaps

Inspect for Gaps: After placement, walk along the line of silt socks and check for any gaps underneath. Fill these gaps with soil to ensure there is no water undercutting the barrier.

Step 6: Maintenance

Regular Inspections: Regularly inspect the silt socks, especially after rain events. Look for signs of wear, tear, or sediment build-up that could reduce effectiveness.Replace as Needed: If a silt sock is damaged or overly saturated with sediment, replace it to maintain the integrity of your erosion control system.

Step 7: Removal or Integration

Plan for Removal: If the silt socks are temporary, plan for their removal once they are no longer needed or once construction is completed.Integrate with Vegetation: In some cases, silt socks can be left in place to integrate into the natural landscape as part of permanent landscaping, enhancing sediment control long-term.

Why Choose ECD for Silt Socks?

Choose Erosion Control Direct (ECD) for your silt socks and experience top-tier erosion and sediment control solutions designed to meet the rigorous demands of any construction or landscaping project.

At ECD, we specialize in providing high-quality, durable silt socks that effectively trap sediment while allowing water to flow through, minimizing environmental impact and complying with regulatory standards.

Our silt socks are manufactured from superior materials that withstand diverse environmental conditions. We leverage advanced technology and extensive industry knowledge to ensure our products deliver unmatched performance and durability.

Featured Silt Sock Articles

From the Experts: Navigating the Landscape of Erosion Control

Homeowner’s Guide: Effective Residential Erosion Control Solutions and Techniques

Homeowner’s Guide: Effective Residential Erosion Control Solutions and Techniques

July 17, 20248 min read

Erosion is a natural process that can significantly impact residential properties, leading to soil loss, landscape damage, and even structural issues. As a homeowner, understanding and implementing effective erosion control measures is crucial for maintaining your property’s integrity and value. This comprehensive guide will explore various erosion control products and techniques specifically tailored for residential settings, helping you protect your home and landscape from the damaging effects of erosion.

Understanding Residential Erosion

Before diving into solutions, it’s essential to understand what causes erosion in residential areas. The primary culprits are:

  1. Water runoff

  2. Wind

  3. Lack of vegetation

  4. Improper landscaping

  5. Construction activities

Residential erosion can manifest in various ways, including:

  • Soil loss from gardens and lawns

  • Formation of gullies and rills

  • Exposed tree roots

  • Sediment accumulation in driveways and walkways

  • Foundation issues due to soil instability

Effective Residential Erosion Control Solutions

1. Vegetation and Landscaping Techniques

One of the most natural and effective ways to control erosion is through strategic vegetation and landscaping. Here are some techniques to consider:

a) Native Plant Selection

Choose plants native to your area as they are adapted to local soil and climate conditions. Native plants typically have deeper root systems that help stabilize soil.

Dr. Doug Tallamy, Professor of Entomology at the University of Delaware, emphasizes the importance of native plants:

“Native plants are not only beautiful, but they’re also essential to the local ecosystem. Their deep root systems make them excellent choices for erosion control in residential settings.”

b) Ground Covers

Ground covers are low-growing plants that spread quickly, providing a dense cover that protects soil from erosion. Some effective ground covers for erosion control include:

  • Creeping juniper

  • Vinca minor

  • Pachysandra

  • Creeping phlox

c) Mulching

Applying a layer of mulch around plants and in garden beds helps retain moisture, suppress weeds, and protect soil from erosion. Organic mulches like wood chips, straw, or shredded leaves are particularly beneficial as they improve soil structure as they decompose.

2. Structural Solutions

For areas with severe erosion or steep slopes, structural solutions may be necessary. These include:

a) Retaining Walls

Retaining walls are an effective way to stabilize slopes and prevent soil erosion. They can be constructed from various materials, including:

  • Concrete blocks

  • Natural stone

  • Timber

  • Gabions (wire cages filled with rocks)

When designing a retaining wall, consider factors such as soil type, slope angle, and drainage requirements.

b) Terracing

Terracing involves creating a series of level steps on a slope, reducing its overall gradient and slowing water runoff. This technique is particularly useful for steep residential landscapes.

c) French Drains

French drains are subsurface drainage systems that help redirect water away from problem areas. They consist of a perforated pipe surrounded by gravel, which collects and channels water away from the area prone to erosion.

3. Erosion Control Blankets and Mats

Erosion control blankets and mats are temporary or permanent coverings that protect soil from erosion while allowing vegetation to establish. These products are particularly useful for:

  • Newly seeded areas

  • Steep slopes

  • Areas with high water flow

There are various types of erosion control blankets, including:

  • Biodegradable options made from natural fibers like straw or coconut

  • Synthetic options for long-term erosion control

4. Silt Fences and Barriers

Silt fences are temporary barriers used to control sediment runoff during construction or landscaping projects. They are typically made of geotextile fabric supported by wooden or metal stakes.

While silt fences are primarily used in construction settings, they can also be beneficial for residential projects that involve significant soil disturbance.

5. Rain Gardens and Bioswales

Rain gardens and bioswales are landscaping features designed to capture and filter stormwater runoff. They not only help control erosion but also improve water quality and support local ecosystems.

Dr. William Hunt, Professor and Extension Specialist at North Carolina State University, highlights the benefits of rain gardens:

“Rain gardens are an excellent way for homeowners to manage stormwater runoff and reduce erosion. They’re not only functional but can be beautiful additions to any landscape.”

6. Permeable Paving

Traditional impermeable surfaces like concrete driveways and patios can increase water runoff and exacerbate erosion. Permeable paving options allow water to infiltrate the ground, reducing runoff and erosion. Options include:

  • Permeable pavers

  • Porous asphalt

  • Gravel stabilizers

Implementing Erosion Control in Wet Climates

For homeowners in areas with high rainfall, additional measures may be necessary to control erosion effectively. Some strategies to consider include:

  • Enhanced drainage systems

  • More robust vegetation choices

  • Use of erosion control blankets with higher water flow resistance

  • Implementation of rain barrels or cisterns to capture excess rainwater

Erosion Control for Specific Residential Areas

Driveways and Walkways

Erosion along driveways and walkways can lead to unsightly and potentially dangerous conditions. Consider these solutions:

  • Install drainage channels or French drains along the edges

  • Use permeable paving materials

  • Create swales to direct water away from paved surfaces

Gardens and Lawns

To protect your garden and lawn from erosion:

  • Implement proper grading to ensure water flows away from structures

  • Use raised beds in areas prone to erosion

  • Maintain a healthy, dense lawn through proper care and maintenance

Slopes and Hillsides

Sloped areas in residential landscapes are particularly vulnerable to erosion. Consider these techniques:

  • Terracing

  • Retaining walls

  • Erosion control blankets combined with vegetation

  • Contouring and berms to slow water flow

DIY vs. Professional Erosion Control

While many erosion control techniques can be implemented as DIY projects, some situations may require professional assistance. Consider consulting a professional if:

  • You have severe erosion issues

  • Your property has steep slopes or complex drainage problems

  • You’re unsure about the best solutions for your specific situation

  • You need to comply with local regulations regarding erosion control

Maintenance and Monitoring

Implementing erosion control measures is not a one-time task. Regular maintenance and monitoring are crucial for long-term success. Develop a schedule for:

  • Inspecting erosion control structures

  • Maintaining healthy vegetation

  • Cleaning drainage systems

  • Repairing any damage promptly

The Importance of Erosion Control for Parks and Public Spaces

While this guide focuses on residential erosion control, it’s worth noting that many of these techniques are also applicable to public spaces like parks and recreation areas. Effective erosion control in these spaces helps preserve natural beauty, protect wildlife habitats, and ensure safe public access.

Conclusion

Residential erosion control is a critical aspect of property maintenance that protects your investment and the environment. By implementing a combination of vegetative, structural, and management techniques, homeowners can effectively combat erosion and create a more stable, beautiful landscape.

Remember that erosion control is an ongoing process that may require adjustments over time. Stay informed about new techniques and products, and don’t hesitate to seek professional advice when needed. With proper planning and implementation, you can protect your property from the damaging effects of erosion for years to come.

Q&A Section

Q: How do I stop erosion on my property?
A: To stop erosion on your property, implement a combination of techniques such as planting vegetation, installing erosion control blankets, creating proper drainage systems, using mulch, and considering structural solutions like retaining walls for severe cases.

Q: What are the 3 main types of erosion control?
A: The three main types of erosion control are vegetative methods (e.g., planting grass and trees), structural methods (e.g., retaining walls and terraces), and management practices (e.g., proper drainage and soil conservation techniques).

Q: What is the cheapest way to stop erosion?
A: The cheapest way to stop erosion is often through vegetative methods, such as planting grass or ground cover plants, and applying mulch. These methods are cost-effective and can be implemented as DIY projects.

Q: How do you fix erosion around the house?
A: To fix erosion around the house, ensure proper grading to direct water away from the foundation, install gutters and downspouts, create a buffer zone of vegetation, use erosion control blankets on bare soil, and consider French drains for severe cases.

Q: What plants are good for erosion control?
A: Plants good for erosion control include deep-rooted native grasses, ground covers like creeping juniper and vinca, and shrubs with extensive root systems. Native plants adapted to your local climate are often the best choices.

Q: How do you stop soil erosion on a hill?
A: To stop soil erosion on a hill, use a combination of techniques such as terracing, planting deep-rooted vegetation, installing erosion control blankets, creating berms or swales, and considering retaining walls for steep slopes.

Q: What material is best for erosion control?
A: The best material for erosion control depends on the specific situation, but common effective materials include erosion control blankets made from natural fibers, riprap (large stones), geotextiles, and vegetation.

Q: How do you make an erosion control barrier?
A: To make an erosion control barrier, you can use materials like straw bales, silt fences, or create berms from compacted soil. The choice depends on the scale of the project and the severity of erosion.

Q: What is the fastest way to stop erosion?
A: The fastest way to stop erosion is often through the installation of erosion control blankets or mats, combined with fast-growing vegetation. For immediate results in severe cases, structural solutions like retaining walls may be necessary.

Q: How do you fix a badly eroded lawn?
A: To fix a badly eroded lawn, start by addressing drainage issues, then fill in eroded areas with topsoil, seed or sod the area, apply erosion control blankets if needed, and water regularly until the grass is established.

Get Expert Erosion Control Solutions

Implementing the right erosion control solutions is crucial for protecting your property and the environment. At Erosion Control Direct, we’re committed to providing you with top-quality products and expert advice to address your specific erosion control needs. For personalized assistance and product recommendations, don’t hesitate to reach out:

• Call us at (888) 920-5005 to speak with one of our erosion control experts.
• Visit our website at https://erosioncontroldirect.com to browse our product range or submit an online inquiry.
• For detailed quotations, email us at [email protected].

Let us help you find the perfect erosion control solution for your project. Contact Erosion Control Direct today and take the first step towards effective soil stabilization and environmental protection.

blog author image

Erosion Control Direct

Erosion Control Direct - Premium supplier of erosion control products

Back to Blog
Homeowner’s Guide: Effective Residential Erosion Control Solutions and Techniques

Homeowner’s Guide: Effective Residential Erosion Control Solutions and Techniques

July 17, 20248 min read

Erosion is a natural process that can significantly impact residential properties, leading to soil loss, landscape damage, and even structural issues. As a homeowner, understanding and implementing effective erosion control measures is crucial for maintaining your property’s integrity and value. This comprehensive guide will explore various erosion control products and techniques specifically tailored for residential settings, helping you protect your home and landscape from the damaging effects of erosion.

Understanding Residential Erosion

Before diving into solutions, it’s essential to understand what causes erosion in residential areas. The primary culprits are:

  1. Water runoff

  2. Wind

  3. Lack of vegetation

  4. Improper landscaping

  5. Construction activities

Residential erosion can manifest in various ways, including:

  • Soil loss from gardens and lawns

  • Formation of gullies and rills

  • Exposed tree roots

  • Sediment accumulation in driveways and walkways

  • Foundation issues due to soil instability

Effective Residential Erosion Control Solutions

1. Vegetation and Landscaping Techniques

One of the most natural and effective ways to control erosion is through strategic vegetation and landscaping. Here are some techniques to consider:

a) Native Plant Selection

Choose plants native to your area as they are adapted to local soil and climate conditions. Native plants typically have deeper root systems that help stabilize soil.

Dr. Doug Tallamy, Professor of Entomology at the University of Delaware, emphasizes the importance of native plants:

“Native plants are not only beautiful, but they’re also essential to the local ecosystem. Their deep root systems make them excellent choices for erosion control in residential settings.”

b) Ground Covers

Ground covers are low-growing plants that spread quickly, providing a dense cover that protects soil from erosion. Some effective ground covers for erosion control include:

  • Creeping juniper

  • Vinca minor

  • Pachysandra

  • Creeping phlox

c) Mulching

Applying a layer of mulch around plants and in garden beds helps retain moisture, suppress weeds, and protect soil from erosion. Organic mulches like wood chips, straw, or shredded leaves are particularly beneficial as they improve soil structure as they decompose.

2. Structural Solutions

For areas with severe erosion or steep slopes, structural solutions may be necessary. These include:

a) Retaining Walls

Retaining walls are an effective way to stabilize slopes and prevent soil erosion. They can be constructed from various materials, including:

  • Concrete blocks

  • Natural stone

  • Timber

  • Gabions (wire cages filled with rocks)

When designing a retaining wall, consider factors such as soil type, slope angle, and drainage requirements.

b) Terracing

Terracing involves creating a series of level steps on a slope, reducing its overall gradient and slowing water runoff. This technique is particularly useful for steep residential landscapes.

c) French Drains

French drains are subsurface drainage systems that help redirect water away from problem areas. They consist of a perforated pipe surrounded by gravel, which collects and channels water away from the area prone to erosion.

3. Erosion Control Blankets and Mats

Erosion control blankets and mats are temporary or permanent coverings that protect soil from erosion while allowing vegetation to establish. These products are particularly useful for:

  • Newly seeded areas

  • Steep slopes

  • Areas with high water flow

There are various types of erosion control blankets, including:

  • Biodegradable options made from natural fibers like straw or coconut

  • Synthetic options for long-term erosion control

4. Silt Fences and Barriers

Silt fences are temporary barriers used to control sediment runoff during construction or landscaping projects. They are typically made of geotextile fabric supported by wooden or metal stakes.

While silt fences are primarily used in construction settings, they can also be beneficial for residential projects that involve significant soil disturbance.

5. Rain Gardens and Bioswales

Rain gardens and bioswales are landscaping features designed to capture and filter stormwater runoff. They not only help control erosion but also improve water quality and support local ecosystems.

Dr. William Hunt, Professor and Extension Specialist at North Carolina State University, highlights the benefits of rain gardens:

“Rain gardens are an excellent way for homeowners to manage stormwater runoff and reduce erosion. They’re not only functional but can be beautiful additions to any landscape.”

6. Permeable Paving

Traditional impermeable surfaces like concrete driveways and patios can increase water runoff and exacerbate erosion. Permeable paving options allow water to infiltrate the ground, reducing runoff and erosion. Options include:

  • Permeable pavers

  • Porous asphalt

  • Gravel stabilizers

Implementing Erosion Control in Wet Climates

For homeowners in areas with high rainfall, additional measures may be necessary to control erosion effectively. Some strategies to consider include:

  • Enhanced drainage systems

  • More robust vegetation choices

  • Use of erosion control blankets with higher water flow resistance

  • Implementation of rain barrels or cisterns to capture excess rainwater

Erosion Control for Specific Residential Areas

Driveways and Walkways

Erosion along driveways and walkways can lead to unsightly and potentially dangerous conditions. Consider these solutions:

  • Install drainage channels or French drains along the edges

  • Use permeable paving materials

  • Create swales to direct water away from paved surfaces

Gardens and Lawns

To protect your garden and lawn from erosion:

  • Implement proper grading to ensure water flows away from structures

  • Use raised beds in areas prone to erosion

  • Maintain a healthy, dense lawn through proper care and maintenance

Slopes and Hillsides

Sloped areas in residential landscapes are particularly vulnerable to erosion. Consider these techniques:

  • Terracing

  • Retaining walls

  • Erosion control blankets combined with vegetation

  • Contouring and berms to slow water flow

DIY vs. Professional Erosion Control

While many erosion control techniques can be implemented as DIY projects, some situations may require professional assistance. Consider consulting a professional if:

  • You have severe erosion issues

  • Your property has steep slopes or complex drainage problems

  • You’re unsure about the best solutions for your specific situation

  • You need to comply with local regulations regarding erosion control

Maintenance and Monitoring

Implementing erosion control measures is not a one-time task. Regular maintenance and monitoring are crucial for long-term success. Develop a schedule for:

  • Inspecting erosion control structures

  • Maintaining healthy vegetation

  • Cleaning drainage systems

  • Repairing any damage promptly

The Importance of Erosion Control for Parks and Public Spaces

While this guide focuses on residential erosion control, it’s worth noting that many of these techniques are also applicable to public spaces like parks and recreation areas. Effective erosion control in these spaces helps preserve natural beauty, protect wildlife habitats, and ensure safe public access.

Conclusion

Residential erosion control is a critical aspect of property maintenance that protects your investment and the environment. By implementing a combination of vegetative, structural, and management techniques, homeowners can effectively combat erosion and create a more stable, beautiful landscape.

Remember that erosion control is an ongoing process that may require adjustments over time. Stay informed about new techniques and products, and don’t hesitate to seek professional advice when needed. With proper planning and implementation, you can protect your property from the damaging effects of erosion for years to come.

Q&A Section

Q: How do I stop erosion on my property?
A: To stop erosion on your property, implement a combination of techniques such as planting vegetation, installing erosion control blankets, creating proper drainage systems, using mulch, and considering structural solutions like retaining walls for severe cases.

Q: What are the 3 main types of erosion control?
A: The three main types of erosion control are vegetative methods (e.g., planting grass and trees), structural methods (e.g., retaining walls and terraces), and management practices (e.g., proper drainage and soil conservation techniques).

Q: What is the cheapest way to stop erosion?
A: The cheapest way to stop erosion is often through vegetative methods, such as planting grass or ground cover plants, and applying mulch. These methods are cost-effective and can be implemented as DIY projects.

Q: How do you fix erosion around the house?
A: To fix erosion around the house, ensure proper grading to direct water away from the foundation, install gutters and downspouts, create a buffer zone of vegetation, use erosion control blankets on bare soil, and consider French drains for severe cases.

Q: What plants are good for erosion control?
A: Plants good for erosion control include deep-rooted native grasses, ground covers like creeping juniper and vinca, and shrubs with extensive root systems. Native plants adapted to your local climate are often the best choices.

Q: How do you stop soil erosion on a hill?
A: To stop soil erosion on a hill, use a combination of techniques such as terracing, planting deep-rooted vegetation, installing erosion control blankets, creating berms or swales, and considering retaining walls for steep slopes.

Q: What material is best for erosion control?
A: The best material for erosion control depends on the specific situation, but common effective materials include erosion control blankets made from natural fibers, riprap (large stones), geotextiles, and vegetation.

Q: How do you make an erosion control barrier?
A: To make an erosion control barrier, you can use materials like straw bales, silt fences, or create berms from compacted soil. The choice depends on the scale of the project and the severity of erosion.

Q: What is the fastest way to stop erosion?
A: The fastest way to stop erosion is often through the installation of erosion control blankets or mats, combined with fast-growing vegetation. For immediate results in severe cases, structural solutions like retaining walls may be necessary.

Q: How do you fix a badly eroded lawn?
A: To fix a badly eroded lawn, start by addressing drainage issues, then fill in eroded areas with topsoil, seed or sod the area, apply erosion control blankets if needed, and water regularly until the grass is established.

Get Expert Erosion Control Solutions

Implementing the right erosion control solutions is crucial for protecting your property and the environment. At Erosion Control Direct, we’re committed to providing you with top-quality products and expert advice to address your specific erosion control needs. For personalized assistance and product recommendations, don’t hesitate to reach out:

• Call us at (888) 920-5005 to speak with one of our erosion control experts.
• Visit our website at https://erosioncontroldirect.com to browse our product range or submit an online inquiry.
• For detailed quotations, email us at [email protected].

Let us help you find the perfect erosion control solution for your project. Contact Erosion Control Direct today and take the first step towards effective soil stabilization and environmental protection.

blog author image

Erosion Control Direct

Erosion Control Direct - Premium supplier of erosion control products

Back to Blog

FAQs

Your frequently asked silt sock related questions answered

What are silt socks and how do they contribute to erosion control?

Silt socks are tubular mesh devices filled with organic materials like straw, woodchips, or gravel. They are used to trap sediment and control erosion by stabilizing soil and filtering runoff water, preventing pollutants from entering water bodies.

How are silt socks manufactured and what materials are used?

Silt socks are typically made from durable, synthetic fabrics or natural textiles like jute and coir. They are filled with materials that help in sediment retention and water filtration. The manufacturing process involves ensuring that the mesh and filler materials are environmentally friendly and effective in sediment control.

Can silt socks be used on any type of soil or terrain?

Silt socks are versatile and can be used on various types of soil and grades of slopes. They are particularly effective in areas where soil stabilization and pollution reduction are needed, such as construction sites, agricultural lands, and roadside developments.

What are the environmental benefits of using silt socks over traditional erosion barriers like silt fences?

Silt socks offer enhanced environmental benefits by using biodegradable materials that integrate with the ecosystem over time. They reduce the need for mechanical installation, minimizing soil disturbance, and they can be planted over or left to decompose, enhancing soil quality.

How do you properly install silt socks to ensure maximum effectiveness?

Proper installation of silt socks involves laying them along the contour lines of slopes or around the perimeter of disturbance areas. They should be entrenched slightly and staked securely to prevent underflow and ensure they conform to the ground surface for effective filtration and sediment capture.

What maintenance is required for silt socks, and how long do they last?

Maintenance involves regular inspections to check for breaches or underflows and replacing the filler material if it becomes too compacted or degraded. The lifespan of a silt sock depends on the material and environmental conditions but typically lasts through the construction phase or until vegetation is established.

Are there different types of silt socks for specific applications?

Yes, silt socks come in various diameters and fill materials to suit different applications. For example, smaller diameter socks filled with lighter materials like straw are used for low-flow areas, while larger socks filled with gravel or woodchips are suitable for areas with higher water volumes or severe erosion.

How do silt socks impact local wildlife and vegetation?

Silt socks are designed to be wildlife-friendly and provide a natural method for erosion control without harming the local flora and fauna. Their permeable nature allows water to seep through while retaining soil, which encourages vegetation growth and creates a habitat for small organisms.

Can silt socks be customized for large-scale projects?

For large-scale applications, silt socks can be customized in terms of size, fill material, and density to meet specific project requirements. This customization helps in effectively managing erosion and sediment control on a project-by-project basis.

What should be considered when disposing of or recycling silt socks?

After their useful life, silt socks made from biodegradable materials can be cut open and the contents spread over the land to decompose naturally. Synthetic socks need to be disposed of according to local regulations or can be recycled where facilities exist.

© Copyright 2024. Erosion Control Direct. All Rights Reserved

© Copyright 2024. Erosion Control Direct. All Rights Reserved