Step 1: Site Preparation

Clear Debris and Smooth Area: Remove rocks, debris, and large clumps of soil. Smooth and grade the area to create an even surface, which helps the blanket conform to the soil and prevents water from pooling.

Step 2: Soil Preparation

Prepare Seedbed: If seeding is required, spread the grass or vegetation seed evenly over the area before laying down the blanket. Ensure that the seed selection is suitable for the soil type and local climate.

Step 3: Dig Anchor Trenches

Top of Slope Trench: At the top of the slope where installation begins, dig a trench approximately 6 inches deep and 6 inches wide. This trench will help anchor the blanket securely.

Step 4: Roll Out the Blanket

Deploy Blanket: Start at the top of the slope, placing the end of the erosion control blanket into the trench. Unroll the blanket down the slope, ensuring it is in direct contact with the soil. Avoid stretching or pulling the blanket too taut.

Step 5: Secure the Blanket

Backfill Trench: Once the blanket is laid out, fill the trench at the top of the slope with the excavated soil and compact it over the blanket’s end to anchor it firmly.Stake or Staple: Use biodegradable stakes or staples to secure the blanket to the ground along its length, spacing them every 1 to 3 feet depending on the slope and soil conditions.

Step 6: Overlap Sections

Overlap Edges: If multiple blankets are needed to cover the area, overlap the edges by at least 6 inches. Secure the overlaps with stakes or staples to prevent soil erosion underneath.

Step 7: Secure Blanket Edges

Anchor at Bottom: At the bottom of the slope and along the sides, dig shallow trenches to bury the edges of the blanket. This helps prevent water from running underneath the blanket.

Step 8: Final Inspection

Check Installation: Inspect the entire installation to ensure there are no gaps or loose areas. The blanket should be smooth and well-anchored, with all overlaps and edges properly secured.

Step 9: Post-Installation Care

Watering: Irrigate the area if needed to encourage seed germination and vegetation growth. Continue to monitor and maintain moisture levels, especially during dry periods.

Step 10: Ongoing Maintenance

Regular Checks: Periodically inspect the blanket to ensure it remains secure and intact. After heavy rain, check for any signs of undercutting or displacement and make necessary repairs to stakes and staples.